| HAIER U69 HOME FIRST BY Z3X
BROM.DLL Version :BROM_DLL_v3.1044.00 From 2010/11/05 11:42:46
META.DLL Version :META_DLL_v6.1044.00 From 2010/11/05 11:41:14
Detecting Loaders ...
Download Agents Found :8
Ready.
Press Connect to detect memory config...
Selected model is:Generic MT62XX NOR:AUTO
Press Connect to detect memory config...
Selected model is:Generic MT62XX NOR:AUTO
Starting flasher module.... [BOOT_MODE]
Boot filename: C:\Archivos de programa\Z3X\MTK\JRD_AllInOne_DA.bin
Reconnect battery and press power button now!
Getting MCUID...
Booting... You can release power key now!
Project Name: MT6225_S00
[!] Failed to detect RAM (Possible HW failure)
NOR Detected : (256Mb+0Kb) [SPANSION] S29WS128R_B
NAND Detected : N/A
Advanced detection information:
BBCHIP: "MT6225_S00", EXT_26M
CODE(0x6225), VER(0x8A05), SW(0x8A00)
NOR_ID: "[SPANSION] S29WS128R_B"
NOR_ID: 0x0020, 0x880D, 0x0000, 0x0000
NAND_ID: "NAND_UNKNOWN"
NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
Detection Done!
Reading NOR : "C:\Archivos de programa\Z3X\MTK\MTKBOOT.TMP", 0x00000000:0x00080000
Operation Done!
Setting NOR buffer size :2000000
PostProcessing Boot File
ROMINFO V4 Structure found!
Ver.:HEF225_GEMINI_PCB01_GPRS_MT6225_S00.HG-U69-H01-S005-CO.BIN
Platform:HG-U69-H01-S005-CO
Filesystem:01400000:00C00000
This device have no SEC block (Safe for READ/WRITE)
Done!
Press Connect to detect memory config...
Selected model is:Generic MT62XX NOR:AUTO
Starting flasher module.... [FORMAT_MODE]
Reconnect battery and press power button now!
Reset NVRAM to factory default setting ...
Connected in META Mode.
BaseBand Chip version : MT6225, E05
DSP Firmware ver. : 2006.06.14
Software version : HG-U69-H01-S005-CO
Hardware version : TECHAIN25_GEMINI_HW
Melody version : Melody V0.0
NVM Reset OK.
Operation Done!
Press Connect to detect memory config...
Selected model is:Generic MT62XX NOR:AUTO
Starting flasher module.... [FORMAT_MODE]
Reconnect battery and press power button now!
Getting MCUID...
Booting... You can release power key now!
Project Name: MT6225_S00
[!] Failed to detect RAM (Possible HW failure)
NOR Detected : (256Mb+0Kb) [SPANSION] S29WS128R_B
NAND Detected : N/A
Advanced detection information:
BBCHIP: "MT6225_S00", EXT_26M
CODE(0x6225), VER(0x8A05), SW(0x8A00)
NOR_ID: "[SPANSION] S29WS128R_B"
NOR_ID: 0x0020, 0x880D, 0x0000, 0x0000
NAND_ID: "NAND_UNKNOWN"
NAND_ID: 0x0000, 0x0000, 0x0000, 0x0000
Detection Done!
Formatting NOR :0x01400000:0x00C00000
Operation Done!
Opening COMPORT...
Checking Phone...
Setting TestMode...
Writing IMEI.
Verify IMEI.
Done Writing IMEI , restart your phone....
Opening COMPORT...
Checking Phone...
Setting TestMode...
Writing IMEI.
Verify IMEI.
Done Writing IMEI , restart your phone....
|
