FORO EXCLUSIVO UPDATES CYCLONE BOX

Cyclone!! FREE, STANDALONE UNLOCK/SD REPAIR/SX4 AUTH/SD BACKUP/..FOR ALL NEW BB5 HASH
Hi, new update for Cyclone Box is ready.

Reading of LOG file added for all latest hashes and roms using new flashing protocol for RAPU CPU.

This means you can now:
- SP Unlock using LOG2COD
- Repair supedongle keys
- Backup superdongle key - FIRST AND ONLY IN THE WORLD (no other box support new encryption!)
- Create RPL from phone - 100% Nokia LIke (with ALL security)
- Standalone SX4 authorization without SX4 Card (only box)
- Detailed security analysis
- Read MCU&DSP Timestamps
- Others (soon....)

The new logreading method is simply not related to Rootkey hash.
If loader is signed for given hash and runs ok - it will work.
RAPU Loader is signed for following hashes (however most of them even not exists in production, or keys isn't use anymore, but as long as other teams provide this hashes, we will provide it too):

68597B9162BAB81AF74C56E78EA2588F
EA81B32860B86EF4231A11831045F3E6
8E309B54DA1ADDE27C2A035D63AACACD
916F75217F32081248B15C38DFC8E81B - Nokia X3-02, Nokia C5, Nokia E5, Nokia N8, Nokia C7, Nokia C3-01
DA550B5BAAB517409088A3E4F3EB53AC
46802B476C93A05CBAF76A64752086A9*
25B977A055BE9B5DEC0C38A2A279C695 - 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
700370BCF8AFBAB25DD62DBD124FD9CE - Nokia 5630
87FAC992288DA497A663E5DDC0410B11
928E5FFB88D81E5F74729A212AB9D12E
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
55DF9CBCC80B17225043DDA1CC783C97

Of course update is free, we don't ask for any activations, we don't even require internet connection.

For reading Log file you need valid TX2 enabled cable (otherwise software will hangup upon Getting Configuration!).

Here is tested with Nokia C5 (thx Moulnisky!)

Quote:
Reading SL3 LOG File...
MCU Version V ICPR82_10w08
MCU Date 26-02-10
Product RM-645 (Nokia C5)
Manufacturer (c) Nokia
IMEI 354847049967066
Mastercode 5222614247
WARNING: "0AC00114AD9C03443A69EAF6BE05ED1B1E10F214.C000249F " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 0AC00114AD9C03443A69EAF6BE05ED1B1E10F214
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Loader: RAPxx CommonBoot v1.02 (C) 2011 Karwos Labs
Custom loader running OK! Working...
Readed OK, Saving to "0AC00114AD9C03443A69EAF6BE05ED1B1E10F214.C000249F "
Success!
More will come next week probably together with new installer,bugfixes,and features....

Cyclone BOMB!! ALL NEW RAPIDO HASH STANDALONE SL2/SL3 UNLOCK / SD REPAIR / SX4 AUTH..
Hi, new update for Cyclone Box is ready.

Reading of LOG file added for all latest hashes and roms using new flashing protocol for RAPIDO CPU.

This means you can now:
- SP Unlock using LOG2COD (SL3 phones)
- Direct SP unlock of SL2 479cc.. based mobiles using NCK calculation
- Direct SP unlock of SL2 479cc.. based mobiles using RPL calculation
- Repair supedongle keys
- Create RPL from phone - 100% Nokia LIke (with ALL security)
- Standalone SX4 authorization without SX4 Card (only box)
- Detailed security analysis
- Read MCU&DSP Timestamps
- Others (soon....)

The new logreading method is simply not related to Rootkey hash.
If loader is signed for given hash and runs ok - it will work.
RAPIDO Loader is signed for following hashes (however most of them even not exists in production, or keys isn't use anymore, but as long as other teams provide this hashes, we will provide it too):

68597B9162BAB81AF74C56E78EA2588F
EA81B32860B86EF4231A11831045F3E6
8E309B54DA1ADDE27C2A035D63AACACD
916F75217F32081248B15C38DFC8E81B
DA550B5BAAB517409088A3E4F3EB53AC
B8C3ADECFC997FCD8081D3DEAF870B8C
479C6DDE3942E12C429C1D6ADED80371
C70CB07324056BC66A824347F40DB2D5
B1A9CEADB5CE9CF9FB4F442150AA8E09
46802B476C93A05CBAF76A64752086A9
1B0D74C532CA1C6133940C740E8C786E
25B977A055BE9B5DEC0C38A2A279C695
700370BCF8AFBAB25DD62DBD124FD9CE
9DDBFCFE6E73CED7D8C6268C8EB85723
7B045400E1752022F9EB80B0DEA9C65D
928E5FFB88D81E5F74729A212AB9D12E
F2D76DFAFD66C7F195F278417DF05888
CAEEBB65D3C48E6DC73B49DC5063A2EE
FCB5C510AF7F09F313D9BDE85A707CC0
9A28E119033B91D14D22838C86D0D53C
F682624FFB08F6D955DBE7D9C0485084
55DF9CBCC80B17225043DDA1CC783C97
38F312750F686F9FC9B1B3778774A195
BAF3A9C3DBFA8454937DB77F2B8852B1
A5404AE83A594ECADEE532F0C236BFA6
E9EFF4BFAA5393217CA6B17755FC3E14

Of course update is free, we don't ask for any activations, we don't even require internet connection.
For reading Log file you need valid TX2 enabled cable (otherwise software will hangup upon Getting Configuration!).

Here is tested with Nokia 5800-SL3-479cc (thx Moulnisky!)

Quote:
Reading SL3 LOG File...
MCU Version V ICPR72_09w20.15
MCU Date 30-12-09
Product RM-356 (Nokia 5800 XpressMusic)
Manufacturer (c) Nokia
IMEI 352012047692891
Mastercode 413074336
WARNING: "05C00008DF1F00527E9AEF53D8B8ACEC8C185116.C0000607 " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 05C00008DF1F00527E9AEF53D8B8ACEC8C185116
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.03 (C) 2011 Karwos Labs
Custom loader running OK! Working...
Readed OK, Saving to "05C00008DF1F00527E9AEF53D8B8ACEC8C185116.C0000607 "
Success!

Where from download?

www.karwos.hk/CycloneNewUnlockV2.exe

Cyclone STOP THE UNSTOPPABLE!! NEW RAPIDO ENCRYPTION, 1ST SD/CMLA/SX BACKUP, MORE!!!!

Hi to all, new Update for Cyclone Box is Ready.
We are sorry for problems caused by previous release.
In this version we implemented new encryption routines for New MCU RAPIDO Phones. That means you can now:

- Read correct LOG file for SL3 SP Unlock (sorry, discard previous ones!)
- Direct SP Unlock of SL2 New hash (479cc based) phones (6760, 6120c) using NCK Calculation
- Direct SP Unlock of SL2 New hash (479cc based) phones (6760, 6120c) using RPL Calculation
- Absolutly FIRST IN THE WORLD - Superdongle Key Backup for new hash - no other tool support it
- Absolutly FIRST IN THE WORLD - Standalone SX4 authorization without Superdongle key corruption
- Absolutly FIRST IN THE WORLD - CMLA/WMDRM Key backup
- Absolutly FIRST IN THE WORLD - 1:1 Original Nokia RPL Backup (w/o risk of DAMAGING phones!)
- Security analysis
- The new encryption works also for old rapido phones (CAEEBB based) which noone tool could properly decrypt Superdongle/etc data
- More ..

Supported hashes:

68597B9162BAB81AF74C56E78EA2588F
EA81B32860B86EF4231A11831045F3E6
8E309B54DA1ADDE27C2A035D63AACACD
916F75217F32081248B15C38DFC8E81B
DA550B5BAAB517409088A3E4F3EB53AC
B8C3ADECFC997FCD8081D3DEAF870B8C
479C6DDE3942E12C429C1D6ADED80371
C70CB07324056BC66A824347F40DB2D5
B1A9CEADB5CE9CF9FB4F442150AA8E09
46802B476C93A05CBAF76A64752086A9
1B0D74C532CA1C6133940C740E8C786E
25B977A055BE9B5DEC0C38A2A279C695
700370BCF8AFBAB25DD62DBD124FD9CE
9DDBFCFE6E73CED7D8C6268C8EB85723
7B045400E1752022F9EB80B0DEA9C65D
928E5FFB88D81E5F74729A212AB9D12E
F2D76DFAFD66C7F195F278417DF05888
CAEEBB65D3C48E6DC73B49DC5063A2EE
FCB5C510AF7F09F313D9BDE85A707CC0
9A28E119033B91D14D22838C86D0D53C
F682624FFB08F6D955DBE7D9C0485084
55DF9CBCC80B17225043DDA1CC783C97
38F312750F686F9FC9B1B3778774A195
BAF3A9C3DBFA8454937DB77F2B8852B1
A5404AE83A594ECADEE532F0C236BFA6
E9EFF4BFAA5393217CA6B17755FC3E14

And small tests

Nokia 6760 479CC Direct unlock

Quote:
BB5 Unlock Started...
MCU Version V 09w17.03.45
MCU Date 20-10-09
Product RM-573 (Nokia 6760 Slide)
Manufacturer (c) Nokia
IMEI 355203035769745
Mastercode 461474133
Simlock Server SIMLOCK SERVER
Simlock Key 5050200000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 1
Simlock FBUS Cnt 8
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 50502F
Reading Security Block...
Security block OK and saved to "RM-573_355203035769745_5112011_60929 AM.SecurityBlock.PM"
"16200007748E005298591CBC3DA4B4F4FEF358A2.C0005311 " Exists, That is good...
WARNING: Stored CYC file is probably corrupted
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16200007748E005298591CBC3DA4B4F4FEF358A2
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.04 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "16200007748E005298591CBC3DA4B4F4FEF358A2.C0005311 "
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Performing new SL2 Algo...
#pw+238228650439154+1#
#pw+976749305397276+2#
#pw+510431019060809+3#
#pw+978446698302394+4#
#pw+744747389804508+5#
#pw+645730839742156+6#
#pw+867417704847922+7#
Sending NCK Codes..
NCK[1] - ACCEPTED
NCK[2] - Too fast between tries (bruteforce protection)
NCK[3] - Too fast between tries (bruteforce protection)
NCK[4] - Too fast between tries (bruteforce protection)
NCK[5] - Too fast between tries (bruteforce protection)
NCK[6] - Too fast between tries (bruteforce protection)
NCK[7] - Too fast between tries (bruteforce protection)
MCU Version V 09w17.03.45MCU Date 20-10-09
Product RM-573 (Nokia 6760 Slide)
Manufacturer (c) Nokia
IMEI 355203035769745
Mastercode 461474133
Simlock Server SIMLOCK SERVER
Simlock Key 5050200000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 50502F
Simlock NCK #pw+238228650439154+1#
Unlock finished! Time taken 12.219s
5230 Standalone SX4 Auth + security analyze

Quote:
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-588 (Nokia 5230)
Manufacturer (c) Nokia
IMEI 353763044825673
Mastercode 4253371033
IMEI Spare 3A35670344286507
IMEI SV 3335670344286517F1000000
CNT 20.0.005_001_U389
PSN 01458E4AA
Product Code 059B139
Module Code 0204359
Basic Product Code 0584528
PSD 0000000000000000
LPSN 0
APE SW V 20.0.005
APE Variant V 20.0.005V 20.0.005 20.0.005.389.01
APE Test rm588_ENO_x_09wk43v0.050
APE HW 256
APE ADSP 256
RETU 16
TAHVO 22
AHNE 11
HW 0512
RFIC 17141716
DSP simon_ICPR72_10w05
Simlock Server SIMLOCK SERVER
Simlock Key 2140700000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 21407F
Simlock [2,1] State: OPENED Type: MCC-MNC Data: 21402F
Simlock NCK #pw+6SHl74219804726+1#
Started Phone Security Analysis...
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-588 (Nokia 5230)
Manufacturer (c) Nokia
IMEI 353763044825673
Mastercode 4253371033
Reading Security Block...
Security block OK and saved to "RM-588_353763044825673_10052011_221449.SecurityBlock. PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
WARNING: "1CC001140C9B005273D956C28676BF92A6877017.C0000805 " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1CC001140C9B005273D956C28676BF92A6877017
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.04 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "1CC001140C9B005273D956C28676BF92A6877017.C0000805 "
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
SX4 Authorization / SD Repair Procedure Started....
"1CC001140C9B005273D956C28676BF92A6877017.C0000805 " Exists, That is good...
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-588 (Nokia 5230)
Manufacturer (c) Nokia
IMEI 353763044825673
Mastercode 4253371033
Reading Security Block...
Security block OK and saved to "RM-588_353763044825673_10052011_221503.SecurityBlock. PM"
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Found, writing...
[1,0] Written, Length: 114 bytes, Status: OK
[1,2] Written, Length: 98 bytes, Status: OK
[1,4] Written, Length: 110 bytes, Status: OK
[1,6] Written, Length: 98 bytes, Status: OK
[1,8] Written, Length: 110 bytes, Status: OK
[1,13] Written, Length: 98 bytes, Status: OK
[1,16] Written, Length: 98 bytes, Status: OK
[1,18] Written, Length: 98 bytes, Status: OK
[1,20] Written, Length: 98 bytes, Status: OK
[1,22] Written, Length: 16 bytes, Status: OK
[1,23] Written, Length: 4 bytes, Status: OK
[1,24] Written, Length: 84 bytes, Status: OK
[1,25] Written, Length: 4 bytes, Status: OK
[1,26] Written, Length: 110 bytes, Status: OK
[1,28] Written, Length: 98 bytes, Status: OK
[1,29] Written, Length: 10 bytes, Status: OK
[1,31] Written, Length: 98 bytes, Status: OK
[1,33] Written, Length: 36 bytes, Status: OK
[1,34] Written, Length: 80 bytes, Status: OK
[1,35] Written, Length: 16 bytes, Status: OK
[1,37] Written, Length: 4 bytes, Status: OK
[1,39] Written, Length: 36 bytes, Status: OK
[1,44] Written, Length: 182 bytes, Status: OK
[1,45] Written, Length: 182 bytes, Status: OK
[2,0] Written, Length: 448 bytes, Status: OK
[309,0] Written, Length: 4 bytes, Status: OK
[309,1] Written, Length: 2 bytes, Status: OK
[309,2] Written, Length: 12 bytes, Status: OK
[309,4] Written, Length: 12 bytes, Status: OK
[309,5] Written, Length: 12 bytes, Status: OK
[309,7] Written, Length: 12 bytes, Status: OK
[309,8] Written, Length: 12 bytes, Status: OK
[309,17] Written, Length: 12 bytes, Status: OK
Write PM Finished, Record written OK: 33, Record written NOT OK: 0
Nokia X6

Quote:
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-559 (Nokia X6)
Manufacturer (c) Nokia
IMEI 352006046910791
Mastercode 134767774
IMEI Spare 3A25000664197009
IMEI SV 3325000664197019F4000000
CNT v 001_000, 17-03-10, vanilla, RM559rRM559_002_001_M004,
PSN CSF672051
Product Code 059B8W2
Basic Product Code 0589312
PSD 0000000000000000
LPSN 0
WLAN MAC A04E047F2AB8
APE SW V 20.0.005
APE Variant V 20.0.005V 20.0.005 20.0.005.360.02
APE Test rm559_ENO_A_09wk28v0.440
APE HW 256
APE ADSP 256
RETU 16
TAHVO 22
AHNE 11
HW 1123
RFIC |Vapaus_5.1 | Aura_?.?
DSP ICPR72_10w05
Simlock Server SIMLOCK SERVER
Simlock Key 2140400086388183
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 21404F
Simlock NCK #pw+>FKT72534805121+7#
Started Phone Security Analysis...
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-559 (Nokia X6)
Manufacturer (c) Nokia
IMEI 352006046910791
Mastercode 134767774
Reading Security Block...
Security block OK and saved to "RM-559_352006046910791_10052011_220737.SecurityBlock. PM"
Step 1 : Testing SIMLOCK
SIMLOCK SEFLTEST PASSED OK!
Step 2 : Testing SECURITY
SECURITY SEFLTEST PASSED OK!
Step 3 : Analyzing Security Block
WARNING: "1A60010D468C0052CBA704F8193E26C1B8325289.C0000805 " Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1A60010D468C0052CBA704F8193E26C1B8325289
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC005800000121, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.04 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "1A60010D468C0052CBA704F8193E26C1B8325289.C0000805 "
Checking SUPERDONGLE...
SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
Checking SIMLOCK...
Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
Checking MCU&DSP TIMESTAMPS...
MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
Checking CMLA KEYS...
CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
Checking ECC KEYS...
ECC KEYS FOUND AND CHECKSUM OK! PASSED!
Checking DIV KEYS...
DIV KEYS FOUND AND CHECKSUM OK! PASSED!
Analyze finished!
Where from download?
www.karwos.hk/CycloneNewUnlockV3.exe
(Firmware v1.61 required)

Best Regards,
Cyclone Team

Cyclone Box Installer v1.13, HD69xx Support, 15% Faster BF, 20 digits NCK, MEP-4, ..

Hi, New Installer for Cyclone Box is Ready.

What's new ?

=====================
Installer v1.13
24.05.2011
=====================
- New BB5 FBUS/USB Loaders v11.14.0 introduced
- Added 20 digits NCK recognization. Software will now give alert upon reading LBF data, when 20 digits NCK data will be found. This saves server time!
- The Profile Bits are also analyzed now during Reading LBF Data. If phone is i.e. from Telcel Mexico - LBF data will not be readen (because it will not accepted calculated NCK code). This saves server time!
- BB5/XGold LBF is creating now additional "BCL" format file
- BB5/XGold LBF is creating now additional "SHA" format file
- BB5/XGold LBF is creating now additional oclHashCat ATI based 64-bit BAT File
- BB5/XGold LBF is creating now additional oclHashCat ATI based 32-bit BAT File
- BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 64-bit BAT File
- BB5/XGold LBF is creating now additional oclHashCat NVIDIA based 32-bit BAT File
- SIMLOC30 RPL Write Fixed (C7-00,C2-01,...)
- The generated "BAT" file could be used by oclHashCat-lite. It's 3rd party software, avaiable here: Download oclHashcat-lite-0.05.7z - hashcat, advanced password recovery . Unpack it somewhere, and place in same dir readen "BAT" files. oclHashCat is 15% faster (can reach 6Billions hashes/sec on 2xhd5970) than log2cod, plus it supports latest ATI GPUS (HD6970,HD6990,HD6xxx). It supports calculation resume, etc.
- You don't need now log2cod to generate LBF Data. Just use generated BAT file for fast oclHashCat calculation. Generated COD file you can send directly to our server via "Send COD File to server" button to receive valid Level 7 code.
- Added oclHashCat COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
- Added MxCrap COD file format support (now you can use oclHashCat generated COD/TXT files to submit to server and calculate Level 7 code)
- Added warning message when TX2 transmission error occurs during 2ND Loader Initialization
- Upgraded RAPIDO Custom loader to v1.05. Fixed Reading Unique Data issues on old Public Rom (A8C1D671) based phones (N95,N78,...).
- BlackBerry MEP-4 calculation added
- Merged previous updates (RAPIDO/RAPU/RAP4 all latest hashes support for reading LBF data, etc...)
- Fixed Security Code Reset Issues on DCT4/BB5 Platform
- Firmware v1.61 Released
- Minor changes and bugfixes

Where from download?
www.karwos.hk/CycloneBoxInstaller.exe
The installer already contains all latest updates, you don't need to download nothing more!

Best Regards,
Cyclone Team

Hi to all!

New Cyclone Box Installer v1.14 is Ready.

What's new?

Quote:
=====================
Installer v1.14
07.06.2011
=====================
- New BB5 FBUS/USB Loaders v11.16.0 Introduced
- Unique Data Reading for RAPIDO based phones by USB added
- Unique Data Reading for RAPU based phones by USB added
- SL2 Unlock for Old Hash (E51..,..) and New Hash (6120c,6760) just by USB cable
- SL3 Unlock by reading LBF data for all SL3 RAPIDO/RAPU Phones
- Standalone Superdongle Auth - without SD key corruption
- SD Keys Repair
- Security Analyze
- RPL Backup
- All this using just usb cable...
- Our loaders automatically set phone to LocalMode after reading LogData - tested with N97, seems 1st in world
- RAPIDO phones before reading USB LogFile, needs to be manually set into FlashMode. Apporiate messagebox will be displayed with instructions (replug battery, cable, etc..). If your phone is RAPU or RAP4 based, you don't need to reject battery or do nothing - just click OK and it will switch to RAW mode directly.
- We also added support for FUR-like flashing for RAPIDO phones. That means it's possible to flash these phones FBUS-like (completly erased, etc - FBUS protocol emulation). However, because of many problems we've disabled it in current release. You can test it manually by placing "v11.16.0" RAPIDO loaders into \Loaders\BB5\FPIF32BIT.
* Known problems with RAPIDO 11.16.0 loaders:
* FBUS support is broken
* Readed Certificates via USB is broken (Control transactions support up to ~0x90 bytes of upcoming data)
* Probably not working with Axxxx ROMS (E51)
* Lot of other issues observed
- The FUR-like flashing (not ADL though) will be probably enabled in next version after closer investigation
- Fixed oclHashCat COD File bugs (occurs when last digit of imei is 0)
- Box Firmware v01.62 Released
- Minor changes and bugfixes
All, of course, standalone and free Tested with:

Nokia C5

Code:
Reading SL3 LOG File...
[Nokia C5-00 USB Phonet]: Port opened OK!
MCU Version V ICPR82_10w18.5.2
MCU Date 16-07-10
Product RM-645 (Nokia C5)
Manufacturer (c) Nokia
IMEI 354847045236599
Mastercode 5246147017
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
WARNING: "24200117BD9C03444F3626EDEECC564255FB04E4.C0003160" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia C5-00 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 24200117BD9C03444F3626EDEECC564255FB04E4
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "24200117BD9C03444F3626EDEECC564255FB04E4.C0003160"
Success!
Nokia 5630 XM


Code:
Reading SL3 LOG File...
[Nokia 5630 XpressMusic USB Phonet]: Port opened OK!
MCU Version V ICPR82_09w24.1
MCU Date 15-06-09
Product RM-431 (Nokia 5630 XpressMusic)
Manufacturer (c) Nokia
IMEI 359350021136722
Mastercode 3226214523
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
WARNING: "1CE001126A2F0344C02621363B888F748DD36748.C0003160" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia 5630 XpressMusic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00000C34
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 1CE001126A2F0344C02621363B888F748DD36748
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "1CE001126A2F0344C02621363B888F748DD36748.C0003160"
Success!
Nokia N97

Code:
WARNING: Failed to read RAP Public ID
Reading CYC file from phone...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CB000038A720052E7F618F98DD2D5F6E5C93100
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "0CB000038A720052E7F618F98DD2D5F6E5C93100.C0003160"
Nokia 5530

Code:
Reading CYC file from phone...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051105
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 09E001021288005207821607AFCF935B1795E0E9
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: B8C3ADECFC997FCD8081D3DEAF870B8C
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "09E001021288005207821607AFCF935B1795E0E9.C0003160"
Nokia 5800
Code:
WARNING: Failed to read RAP Public ID
Reading CYC file from phone...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "16900018F3740052C3ECA61A74BBE7E9A3A34FCE.C0003160"
Nokia 5230

Code:
[Nokia 5230 USB Phonet]: Port opened OK!
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-588 (Nokia 5230)
Manufacturer (c) Nokia
IMEI 354336049859812
Mastercode 2260374254
IMEI Spare 3A45330694588901
IMEI SV 3345330694588911F1000000
PPM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
CNT v 001_000, 05-03-10, vanilla, RM588
PSN 0640828AA
Product Code 059D3Q3
Module Code 0204359
Basic Product Code 059C249
PSD 0000000000000000
LPSN 0
APE SW V 20.0.005
APE Variant V 20.0.005V 20.0.005 V 20.0.005
APE Test rm588_ENO_x_09wk43v0.050
APE HW 256
APE ADSP 256
APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.
RETU 16
TAHVO 22
AHNE 11
HW 0512o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
PCI o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
UEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
UPP 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
RFIC 17141716
DSP simon_ICPR72_10w05
LCD 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
BT 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
ADSP Sw 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
ADSP DevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
ADSP RevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
AEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
Flip MCUSW 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12708.n256iV 20.0.005j(!V 20.0.005V 20.0.005 V 20.0.005 r(!v 001_000, 05-03-10, vanilla, RM588uk rm588_ENO_x_09wk43v0.050
Simlock Server SIMLOCK SERVER
Simlock Key 2343000000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 23430F
Auto Selecting Flash Files on User Request...
[Nokia 5230 USB Phonet]: Port opened OK!
Product Code: 059D3Q3
No Flash Datapackage installed for this Phone!
Reading SL3 LOG File...
[Nokia 5230 USB Phonet]: Port opened OK!
MCU Version V ICPR72_10w04.5
MCU Date 22-03-10
Product RM-588 (Nokia 5230)
Manufacturer (c) Nokia
IMEI 354336049859812
Mastercode 2260374254
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
WARNING: "1DC0000EB6A000524EFB32C0210D25187179FFC2.C0000067" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia 5230 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1DC0000EB6A000524EFB32C0210D25187179FFC2
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000231, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "1DC0000EB6A000524EFB32C0210D25187179FFC2.C0000067"
Success!
Nokia E52

Code:
[Nokia E52 USB Phonet]: Port opened OK!
MCU Version V ICPR82_09w46.3
MCU Date 28-12-09
Product RM-469 (Nokia E52)
Manufacturer (c) Nokia
IMEI 355216035074023
Mastercode 2723652247
IMEI Spare 3A55120653700402
IMEI SV 3355120653700432F9000000
PPM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
PSN SEL726460
Product Code 0588653
Basic Product Code 0565921
PSD 0000000000000000
LPSN 0
WLAN MAC A87E33CB8DCE
APE SW 031.012
APE Variant 031.012031.012.01.01031.012.241.02
APE Test 0.072
APE HW 256
APE ADSP 256
APE BT HCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.
RETU 40
TAHVO 00
AHNE 11
HW 6000o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
PCI o256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
UEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
UPP 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
RFIC |Vapaus_5.1 | Aura_?.?
DSP ICPR82_09w46.2_RIOo256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
LCD 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
BT 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
ADSP Sw 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
ADSP DevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
ADSP RevID 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
AEM 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
Flip MCUSW 256qPIHCI Version 12 (rev. 8192). LMP Version 12 (rev. 0). Manufacturer 12652.n256i031.012j(#031.012031.012.01.01031.012.241.02u$Tk0.072Ą,$021.013, 22-Jul-2009, UDA_VF_IE, rm469
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
[Nokia E52 USB Phonet]: Port opened OK!
Product Code: 0588653
No Flash Datapackage installed for this Phone!
Reading SL3 LOG File...
[Nokia E52 USB Phonet]: Port opened OK!
MCU Version V ICPR82_09w46.3
MCU Date 28-12-09
Product RM-469 (Nokia E52)
Manufacturer (c) Nokia
IMEI 355216035074023
Mastercode 2723652247
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
WARNING: "086002021A660344B60B626D2CBDBC90D96BFEBE.C000249F" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia E52 USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00001040
CMT_EM_ASIC_ID: 00001030
CMT_PUBLIC_ID: 086002021A660344B60B626D2CBDBC90D96BFEBE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "086002021A660344B60B626D2CBDBC90D96BFEBE.C000249F"
Success!
Nokia 6700

Code:
[Nokia 6700 classic USB Phonet]: Port opened OK!
MCU Version V 10.50
MCU Date 23-11-09
Product RM-470 (Nokia 6700 classic)
Manufacturer (c) Nokia
IMEI 353790048150162
Mastercode 165217462
IMEI Spare 3A35970084511006
IMEI SV 3335970084511036F9000000
PPM V 10.50, 23-11-09, RM-470, (c) Nokia , C
CNT Content: c_gb_chrome, 3 IE, 23-11-09, RM-470, (c) Nokia , ,
PSN KFW480968
Product Code 0585990
Module Code 0204199
Basic Product Code 0590482
PSD 0000000000000000
LPSN 0
RETU 34
TAHVO 00
AHNE 11
HW 1010
RFIC |Vapaus_5.1 | Aura_?.?
DSP ICPR81_09w37
LCD TPO
BT 410B-v170
Simlock Server SIMLOCK SERVER
Simlock Key 2720500015194980
Simlock Profile 8000000000000002
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 27205F
Simlock [2,1] State: OPENED Type: MCC-MNC Data: 23594F
Simlock NCK #pw+737N24288048822+1#
Auto Selecting Flash Files on User Request...
[Nokia 6700 classic USB Phonet]: Port opened OK!
Product Code: 0585990
This is Valid BB5 Product
No variant found with given Product Code, selecting first one
Reading SL3 LOG File...
[Nokia 6700 classic USB Phonet]: Port opened OK!
MCU Version V 10.50
MCU Date 23-11-09
Product RM-470 (Nokia 6700 classic)
Manufacturer (c) Nokia
IMEI 353790048150162
Mastercode 165217462
Analyzing Profile Bits...
Phone can be NCK unlocked using KEYPAD
Phone can be NCK unlocked using FBUS
15 Digits NCK Found
WARNING: "2B60010FD08C0344B84E013C20C370B731580C87.C000249F" Not Exists, Will read it...
Reading CYC file from phone...
Booting CMT...
[Nokia 6700 classic USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104
CMT_EM_ASIC_ID: 00000C34
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 2B60010FD08C0344B84E013C20C370B731580C87
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695
CMT_BOOT_ROM_CRC: 3E273BF6
CMT_SECURE_ROM_CRC: 37BE26FA
CMT Ready!
New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x0098004000000031, Toshiba, ONENAND
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "2B60010FD08C0344B84E013C20C370B731580C87.C000249F"
Success!
Nokia 5800

Code:
WARNING: Failed to read RAP Public ID
Reading CYC file from phone...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
CMT Ready!
New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.11.16.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
Requested Algorithm: XSR 1.5 (CMT)
Sending Auxiliary Loader...
Auxiliary Loader Sent!
Loader: RAPxx CommonBoot v1.06 (C) 2011 KarwosLabs
Custom loader running OK! Working...
Readed OK, Saving to "16900018F3740052C3ECA61A74BBE7E9A3A34FCE.C0003160"
N8 tested too but missed log somewhere

Firmware v01.62 is required for this installer.

Where from download?
www.karwos.hk/CycloneBoxInstaller.exe

Cyclone Box Firmware v01.66 ReleasedHi

,
this is server-side update only, upgrade your box using Box Maintenance.

- MEP-31845-002 - added
- MEP-41261-001 - added
- MEP-42517-001 - added
- MEP-08589-001 - fixed NCK length
- Changed default SX4 Emulation Serial Number due to blacklist by Nokia in latest PA_SD. Now SX4 serial is calculated using box unique OTP Area, so quite randomfull and further blacklist not possible too.
- Minor Changes and bugfixes

Best regards N Stay Tuned,
Cyclone Team

Hi, new update for Cyclone Box BlackBerry Module is ready.


Added support for following MEPs:

MEP-06041-012
MEP-06041-013
MEP-14074-004
MEP-29080-003
MEP-34870-002




NOTE
Just update your box using Box Maintenance. Each box having 3 update credits.



Still alot more to come so stay tune



Best Regards,
Cyclone Team