Medusa Box (SOLO ACTUALIZACIONES)

« Older Newer »

roniscell

Posted on 7/4/2011, 15:34

Medusa Box v. 1.0.3 is out!

Release notes:

In this version we have added dead boot repair support for following phones:
LG SU920
LG KU9200
LG SH810
LG KH3400

http://medusabox.com/eng/help/download

roniscell

Posted on 18/4/2011, 15:55

Medusa Box v. 1.0.4 is out!

Release notes:

In this version we have added repair for ZTE K3765-Z, ZTE MF622 and Huawei K3765 modems and dead boot repair for Samsung SGH-I900, SGH-I908 PDA Part

Download Medusa Box Installer v 1.0.4

Deep in the boot!

_____
BR,
Medusa Team

roniscell

Posted on 5/5/2011, 19:32

Version 1.0.6 –
Added support for Qualcomm Snapdragon QSD8650 Mobile processor, Samsung SCH-W390 and numerous LG models!

Medusa Box v.1.0.6 Release Notes:
Added support for Qualcomm Snapdragon QSD8650 Mobile processor.
Added EasyRepair and Advanced modes for the following models:
LG SU630
LG KU6300
LG LU2300
LG SU950
LG SH400
LG P506
LG P506GO
LG P505
LG P505R
LG P350G
Samsung SCH-W390
Improved support for Qualcomm MSM72XX and QSD8250 Mobile processors.

To resurrect these models perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select EasyRepair mode.
Press EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

http://medusabox.com/eng/help/download

roniscell

Posted on 10/5/2011, 17:59

Dear Users,

Please welcome Medusa Box v.1.0.7

Added EasyRepair and Advanced modes for the following models:
LG L600i
LG L704i
LG L705i
LG L705ix
LG L706ie
Samsung SCH-W240
Samsung SCH-W350
Samsung SCH-W830
Samsung SPH-W9500
Samsung SPH-W8300

With this update the number of supported LG phone models has exceeded 90!

We prepared some video manuals on using Medusa Box.

Repairing Samsung SPH-W8300 with Medusa Box:

Repairing LG L600i with Medusa Box:

Note! With Medusa Box you don't have to use any "fantastic" pinfinder devices or solder 20 wires!
We present end-user's solutions for resurrection of your devices – ready to use, tested, and with 100% working Jtag testpoint's pictures, easy step-by-step manuals and repair files!

http://medusabox.com/eng/help/download

roniscell

Posted on 27/5/2011, 19:24

Medusa Box v.1.0.8 Release Notes:
Added support for Qualcomm MSM7225 mobile processor.
Added EasyRepair and Advanced modes for the following models:
HTC Desire
HTC Wildfire
Samsung SCH-W590
Samsung SPH-W4200
Samsung SPH-W5000
Added repair IMEI for the following models:
HTC Desire
HTC Wildfire

To resurrect these models perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select EasyRepair mode.
Press EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

We present ready to use, tested end-user solution with 100% working Jtag testpoint's pictures, easy step-by-step manuals and repair files meant for resurrection of your devices!

Download Medusa Box Software 1.0.8

roniscell

Posted on 1/6/2011, 18:25

Version 1.0.9 – Added support for LG, Huawei, ZTE, Samsung devices!

Medusa Box v.1.0.9 Release Notes:
Added EasyRepair and Advanced modes for the following models:
LG KU9500
LG L852i
Samsung SPH-W2900
Samsung SCH-W290
Huawei E583c
ZTE MF632
Siemens SXG75

To resurrect these models perform the following steps:
Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select EasyRepair mode.
Press EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v.1.0.9

roniscell

Posted on 8/6/2011, 16:46

Medusa Box Version 1.1.0 – Added support for HTC, Huawei, Samsung devices!

Medusa Box Version 1.1.0 has been releasaed. In this version we have added support for some HTC, Huawei, Samsung devices!

Medusa Box v.1.1.0 Release Notes:

Added support for OneNAND flash devices on Oualcomm MSM 62XX.
Added EasyRepair and Advanced modes for the following models:
HTC P3700 Touch Diamond
Samsung SGH-F480
Samsung SPH-W9100
Huawei E272
To resurrect these models perform the following steps:
Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select EasyRepair mode.
Press EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.
Download Medusa Box 1.1.0

roniscell

Posted on 17/6/2011, 14:28

Medusa Box v1.1.1 - check details inside

Version 1.1.1 – Added support for new LG, Samsung and HTC devices!
Medusa Box v1.1.1 Release Notes:

Added support for Marvell PXA270 Application processor.
Fixed some stability issues on slow computers.
Fixed flash erase bug on some Qualcomm MSM62xx processors.
Added support for the following devices:
- Samsung SGH-I710 – EasyRepair mode.
- Samsung SGH-I718 – EasyRepair mode.
- Samsung SCH-W270 – EasyRepair and Advanced modes.
- LG LV7400R – EasyRepair and Advanced modes.
- HTC Hero 100 – EasyRepair and Advanced modes.
- HTC Touch Pro 2 (Rhodium) – EasyRepair and Advanced modes.

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK), select 1 MHz or more for I710/I718 (depends on connection quality).
Select the EasyRepair mode.
Press the EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.1.1

roniscell

Posted on 5/7/2011, 16:17

Medusa Box v. 1.1.2 – added new models and features for a wide range of HTC models!

Medusa Box v. 1.1.2 Release Notes:

Added the following models and features:

HTC Blackstone - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
HTC Magic 32A/32B (Sapphire) - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
HTC Jade - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
HTC Dream - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
HTC Raphael - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
HTC Intruder - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
HTC Desire - added CID Repair and Unlock (by code reading)
HTC Touch Pro2 - added CID Repair and Unlock (by code reading)
HTC Wildfire - added CID Repair and Unlock (by code reading)
HTC Diamond - added CID Repair and Unlock (by code reading)
HTC HD2 - added CID Repair and Unlock (by code reading)
HTC Hero - added CID Repair and Unlock (by code reading)

To resurrect these models perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK), select 1 MHz or more for I710/I718 (depends on connection quality).
Select EasyRepair mode.
Press EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download link:

Medusa Box 1.1.2

_______________
BR,
Medusa Box Team

roniscell

Posted on 13/7/2011, 17:11

Medusa Box v. 1.1.3 is out!

Medusa Box v. 1.1.3 Release Notes:

Added support for Qualcomm MSM7600 Mobile processor
Added support for following phone models:
- HTC Imagio - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
- HTC Topaz - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
- HTC myTouch 3G (Espresso) - added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading)
- Samsung SCH-W300 - added Dead Boot Repair
- Samsung SCH-W570 - added Dead Boot Repair
- Samsung SCH-W770 - added Dead Boot Repair

To resurrect devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in the manual;
Make sure that correct model has been selected from the models list;
Set Jtag speed to Auto (RTCK);
Select the EasyRepair mode;
Press the EasyRepair button and follow Wizard instructions;
After operation is successfully finished make sure that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box Software 1.1.3
_____________
Deep in the boot
WBR,
Medusa Box Team

roniscell

Posted on 22/7/2011, 15:27

Medusa Box v1.1.4 - +1 SE, +2 HTC, +4 Samsung

Medusa Box v1.1.4 is out! We have added support for HTC TyTN II, HTC Touch Dual, Sony Ericsson XPERIA X1, Samsung SCH-W410, Samsung SCH-W750, Samsung SCH-W3000 and Samsung SCH-W9000!

Medusa Box v1.1.4 Release Notes:

HTC TyTN II – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
HTC Touch Dual – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
Sony Ericsson XPERIA X1 – added Dead Boot Repair, IMEI Repair, CID Repair, Unlock (by code reading).
Samsung SCH-W410 – added Dead Boot Repair.
Samsung SCH-W750 – added Dead Boot Repair.
Samsung SPH-W3000 – added Dead Boot Repair.
Samsung SPH-W9000 – added Dead Boot Repair.

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select the EasyRepair mode.
Press the EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.1.4
__________________
Deep in the boot!
WBR,
Medusa Box Team

roniscell

Posted on 2/8/2011, 03:22

Medusa Box 1.1.5 - not a beta

Medusa Box v1.1.5 is out! We have added support for Sony Ericsson Xperia X10i, E10i, E15i, Samsung SPH-W4100 and Samsung SCH-W550!

Medusa Box v1.1.5 Release Notes:

Added support for the following phone models:
- Sony Ericsson Xperia X10i – added Dead Boot Repair.
- Sony Ericsson Xperia X10 mini (E10i) – added Dead Boot Repair.
- Sony Ericsson Xperia X8 (E15i) – added Dead Boot Repair.
- Samsung SPH-W4100 – added Dead Boot Repair.
- Samsung SCH-W550 – added Dead Boot Repair.
HTC Desire – improved new flash ICs support (Flashes with 2K page).

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select the EasyRepair mode.
Press the EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.1.5
Supported models list see here
Supported CPUs list see here
______________
WBR,
Medusa Box Team

roniscell

Posted on 16/8/2011, 20:37

Medusa Box v1.1.6 - 4 new HTC inside

Medusa Box v1.1.6 is out! We have added support for Qualcomm MSM8255 and MSM8655 Mobile processors (NAND and eMMC storage types supported)!

Medusa Box v1.1.6 Release Notes:

Added support for the following phone models:

HTC Inspire 4G – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.
HTC Desire HD – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.
HTC Droid Incredible 2 – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.
HTC myTouch 4G – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair: OSBL, SPL, HTC (Security area) partition.

Please note! On these devices JTAG is enabled by FSBL, so Read from and Write to FSBL partition are not allowed.

Smart card update is required.

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to Auto (RTCK).
Select the EasyRepair mode.
Press the EasyRepair button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.1.6
_________________
WBR,
Medusa Box Team

roniscell

Posted on 23/8/2011, 15:20

Medusa Box v1.1.7 is out! We have added FREE UNLOCKING of Sony Ericsson XPERIA X10 (no server, no credits, no queues, no limits) and boot repair for Samsung SCH-W920, SCH-W930, SPH-W3500 and Sony Ericsson U20i!

<span>Medusa Box v.1.1.7 Release Notes:

Added support for the following phone models:

Sony Ericsson XPERIA X10 – Added Unlock via TP.
Sony Ericsson U20i – Added Dead Boot Repair.
Samsung SCH-W920 – Added Dead Boot Repair.
Samsung SCH-W930 – Added Dead Boot Repair.
Samsung SCH-W3500 – Added Dead Boot Repair.

To unlock Sony Ericsson XPERIA X10, perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to "Auto" (RTCK).
Select "Advanced" mode.
Press "Connect" button and wait till device will be connected.
Press "Unlock" button.
After operation is successfully finished verify that device was successfully unlocked.
Desolder JTAG wires.

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to "Auto" (RTCK).
Select the "EasyRepair" mode.
Press the "EasyRepair" button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v.1.1.7
________________________
WBR,
Medusa Box Team

roniscell

Posted on 31/8/2011, 16:13

Medusa Box v1.1.8 - HTC HD7, Samsung Star and more!

Medusa Box v1.1.8 is out! We have added support for Broadcomm BCM2133 Mobile processor and support for HTC HD7, Samsung SPH-W5200, SPH-W5300, SPH-W5310, GT-S5230 (G, H, M, W), GT-S5233A (T,W)!

Medusa Box v1.1.8 Release Notes:

Added support for the following phone models:

HTC HD7 – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair OSBL, SPL, HTC (Security area) partitions.
Samsung SPH-W5200 – added Dead Boot Repair.
Samsung SPH-W5300 – added Dead Boot Repair.
Samsung SPH-W5310 – added Dead Boot Repair.
Samsung GT-S5230 (G, H, M, W) – added Dead Boot Repair.
Samsung GT-S5233A (T, W) – added Dead Boot Repair.

To resurrect these devices perform the following steps:

Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to "Auto" (RTCK).
Select the "EasyRepair" mode.
Press the "EasyRepair" button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Download Medusa Box v1.1.8
_______________________
WBR,
Medusa Box Team

21 replies since 7/4/2011, 15:34 139 views