GsM_SoLuCiOnEs_Creando una red de Soluciones

ORT-JTAG - Samsung GT-P1000 [Galaxy TAB] Unbrick / Repair Dead Boot

« Older   Newer »
  Share  
roniscell
view post Posted on 5/4/2011, 16:00     +1   -1




RT - JTAG UPDATE
[01 Apr 2011]

Description :
ORT Plus V1.34
Hisense C100 Repair Dead Boot

What's new in ORT Plus V1.34 ?
Progress Bar Added in Repair TAB


Released Stuffs :

ORT Plus V1.34
Hisense C100 JTAG Pinout
Hisense C100 Dump File
Hisense C100 Instructions


eed a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
Samsung P1000

ORT is a Real JTAGger's choice

www.ort-jtag.com/

www.ort-jtag.com/blog/
 
Top
roniscell
view post Posted on 8/4/2011, 05:08     +1   -1




ORT-JTAG - Samsung GT-S8530 WAVE II Unbrick / Repair Dead Boot
ORT - JTAG UPDATE
[08 Apr 2011]

Description :
ORT Plus V1.36
Samsung S8530 Repair Dead Boot

What's new in ORT Plus V1.36 ?
QSC 6020 [0x200BF0E1][0x0x220B20E1]
Error Detection improved
RE-Connect Function Added


Released Stuffs :

ORT Plus V1.36
Samsung GT-S8530 Dump File
Samsung GT-S8530 Repair File
Samsung GT-S8530 JTAG Pinout
Samsung GT-S8530 Instructions
Samsung GT-S8530 SM


Full Flashes Uploaded :
Download SGH-A867_0x00000000_FULL_RAW.rar

Download S8530_FULL_RAW.rar

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 8/4/2011, 16:49     +1   -1




RIFF JTAG - Samsung S7230E Wave 723 Unbrick – Boot Repair supported
08.04.2011 Samsung S7230E Wave 723 Unbrick – Boot Repair supported

Resurrecting Samsung S7230E is easy. To power the phone connect USB cable and insert battery. In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.


To resurrect Samsung S7230E:
Solder JTAG cable to Samsung S7230E JTAG pads;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung S7230E is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state. We used MultiLoader 5.64 version.


To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ (on the left side of phone) and ‘Lock’ (right side bottom part) keys and press Power-On.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

www.jtagbox.com/
 
Top
roniscell
view post Posted on 10/4/2011, 23:51     +1   -1




ORT-JTAG Samsung GT-T959 Unbrick / Repair Dead Boot and More inside :)
ORT - JTAG UPDATE
[10 Apr 2011]

Description :
ORT Plus V1.37
Samsung GT-T959 Unbrick / Repair Dead Boot
Samsung GT-I9000 Unbrick / Repair Dead Boot [Revised]


What's new in ORT Plus V1.37 ?
Support S5PC110 Read / Write even boot or spl erased


Released Stuffs :

ORT Plus V1.37
Samsung GT-T959 Repair File
Samsung GT-T959 JTAG Pinout
Samsung GT-T959 Instructions
Samsung GT-I9000 Repair File
Samsung GT-I9000 JTAG Pinout
Samsung GT-I9000 Instructions


Full Flashes Uploaded :
Download T959_512_GOOD_RAW.rar


Previous Update : HTC EVO 4 Repair Dead Boot [World First]
ORT Team Blog : Videos and Manuals


Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
HTC 7

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 20/4/2011, 17:17     +1   -1




RIFF JTAG - CDMA Samsung SCH-S109 (MSM6000) Repair supported and more !

20.04.2011 CDMA Samsung SCH-S109 (MSM6000) Repair supported


Resurrecting Samsung S109 is simple. Phone is auto powered on with charger connected; battery presence is not required.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x3FFFFF).


To resurrect Samsung S109:
Solder JTAG cable to Samsung S109 JTAG pads;
Connect ignition cable for auto power on or use battery;
Make sure Samsung S109 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;
20.04.2011 JTAG Manager v1.31, RIFF Box Firmware v1.23 released


Whats new :


JTAG Manager 1.31
“RUN/STOP” Loaders functionality is added (and alternative to the DCC Loaders)
This is required for some ARM7 cores when Debug Communication Channel (DCC) to/from core is not functional (like in MSM6000)


Firmware 1.23
Added 8/16/32-bit bus read/write access rotuines for ARM7 core
ARM7 debug is now available in ARM/Thumb modes (use the GDBServer for this);

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution
 
Top
roniscell
view post Posted on 21/4/2011, 15:15     +1   -1




ORT-JTAG - Huawei C5330 Repair Dead Boot - ORT Plus V1.40 Released and MORE
ORT - JTAG UPDATE
[21 Apr 2011]

Description :
Huawei C5330 Repair Boot[thx to Abhishek]
ORT Plus V1.40


What's new in ORT Plus V1.40 ?
QSC60xx Read / Write Routines Improved


Released Stuffs :

Huawei C5330 Full Dump
Huawei C5330 JTAG Pinout
Huawei C5330 Instructions
Huawei C2829 Repair File with Unlock Partial
ORT Plus V1.40


Full Flashes Uploaded :
Share FULL Flashes

Previous Update : MSM 6000 Devices FREE
ORT Team Blog : Videos and Manuals


Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
ZTE F156

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 21/4/2011, 21:38     +1   -1




ORT-JTAG - Micromax C112 Repair Boot , Haier C2030 Repair Boot Released

ORT - JTAG UPDATE
[22 Apr 2011]

Description :
Haier C2030 Repair Boot
Micromax C112 Repair Boot

Released Stuffs :

Haier C2030 Full Dump
Haier C2030 JTAG Pinout
Haier C2030 Instructions
Micromax C112 Full Dump
Micromax C112 JTAG Pinout
Micromax C112 Instructions


Full Flashes Uploaded :
Share FULL Flashes

Previous Update : Huawei C5330 Repair Dead Boot
ORT Team Blog : Videos and Manuals


Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
ZTE F156

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 4/5/2011, 19:21     +1   -1




04.05.2011 HTC Droid Incredible ADR6300 (HTC Incredible C) Unbrick Dead Boot Repair supported


Resurrecting HTC Incredible C is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PB3120000′.


To resurrect HTC Incredible C:
Solder JTAG cable to HTC Incredible C JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Incredible C is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.


To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume down’ key and press ‘Power ON’ button to enter HBoot menu;
Hold ‘Volume up’ key and press ‘Power ON’ button to enter Recovery mode;



04.05.2011 Samsung Nexus S (i9023) Unbrick Boot repair supported


Samsung I9023 is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
Current resurrector has two different versions of primary boot loaders (PBL) embedded. This depends on hardware version of your phone which boot to use, thus in case of failure (cannot enter download mode after resurrection) of first loader try selecting another.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.


To resurrect Samsung I9023:
Solder JTAG cable to Samsung I9023 JTAG pads;
Connect microUSB cable to phone and PC;
Insert battery;
Make sure Samsung I9023 is selected in the list of models;
Make sure a fixed TCK frequency is selected;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.


To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution
 
Top
roniscell
view post Posted on 27/6/2011, 19:23     +1   -1




ORT-JTAG - Samsung GT-I5510 , GT-S5660 Unbrick / Repair Dead Boot

ORT - JTAG UPDATE
[27 JUNE 2011]

Description : 
  • Samsung GT-I5510 Unbrick / Repair Dead Boot
  • Samsung GT-S5660 Unbrick / Repair Dead Boot


Released Stuffs :

  • Samsung GT-I5510 JTAG Pinout
  • Samsung GT-I5510 Repair File
  • Samsung GT-I5510 FULL DUMP
  • Samsung GT-I5510 Repair Guide
  • Samsung GT-I5510 SM
  • Samsung GT-S5660 JTAG Pinout
  • Samsung GT-S5660 Repair File
  • Samsung GT-S5660 FULL DUMP
  • Samsung GT-S5660 Repair Guide
  • Samsung GT-S5660 SM



Full Flashes Uploaded :
Previous Update :

ORT Team News and Blog :

ORT is a Real JTAGger's choice

http://www.ORT-JTAG.com
http://www.GPGORT.com




 
Top
roniscell
view post Posted on 29/6/2011, 17:30     +1   -1




ORT - JTAG UPDATE
[29 JUNE 2011]

Description : 
  • Samsung GT-P1000N Unbrick / Repair Dead Boot
  • Samsung SHW-M130K Unbrick / Repair Dead Boot



Released Stuffs :

  • Samsung GT-P1000N JTAG Pinout
  • Samsung GT-P1000N Repair File
  • Samsung GT-P1000N FULL DUMP
  • Samsung GT-P1000N Repair Guide
  • Samsung SHW-M130K JTAG Pinout
  • Samsung SHW-M130K Repair File
  • Samsung SHW-M130K FULL DUMP
  • Samsung SHW-M130K Repair Guide



Full Flashes Uploaded :
Previous Update :

ORT Team News and Blog :

ORT is a Real JTAGger's choice

http://www.ORT-JTAG.com
http://www.GPGORT.com




 
Top
roniscell
view post Posted on 7/7/2011, 21:15     +1   -1




07.07.2011 HTC Wildfire S A510E (HTC Marvel), More CDMA models supported.


Resurrecting HTC WildFireS is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.01.0002 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PC4910000′. Additionally, you can check ‘Repair RECOVERY zones’ to reflash android BOOT and RECOVERY code.
To resurrect HTC WildFireS:
  • Solder JTAG cable to HTC WildFireS JTAG pads;
  • Insert USB Data cable into board and PC;
  • Make sure HTC WildFireS is selected in the list of models;
  • If you use battery, press Power On key;
  • Click Resurrect button;
  • Wait till software signals a successful operation completion;
  • Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
  • Disconnect PC cable;
  • Insert battery;
  • Hold ‘Volume Down’ key and press ‘Power ON’ button. In few seconds you should see usual android boot mode screen.



Following CDMA models are supported from today :



  • Samsung B139 Repair/Unbrick, Read/Write NOR Flash
  • Samsung B259 Repair/Unbrick, Read/Write NOR Flash
  • Samsung B309 Repair/Unbrick, Read/Write NOR Flash
  • Samsung B319 Repair/Unbrick, Read/Write NOR Flash
  • Samsung B379 Repair/Unbrick, Read/Write NOR Flash
  • Samsung B619 Repair/Unbrick, Read/Write NOR Flash
  • Huawei C31 Repair, Read/Write NOR flash
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.


RIFF Box – JTAG Revolution
 
Top
roniscell
view post Posted on 8/7/2011, 17:21     +1   -1




ORT - JTAG UPDATE
[08 JULY 2011]

Description : 
  • Samsung T849 / Galaxy TAB T-Mobile Unbrick / Repair Boot
  • Samsung T959V Unbrick Repair Boot
  • Samsung SGH-I908 Repair Boot
  • Huawei E180 Repair Boot
  • Huawei C31 Repair Boot
  • HTC Vogue / PPC 6900 Repair Boot
  • ZTE R518 Repair Boot
  • SKY-IM S550S Repair Boot [thx to : benguetcowboy ]



Released Stuffs :

  • Samsung T849 Pinout
  • Samsung T849 Repair File
  • Samsung T849 FULL DUMP
  • Samsung T849 Repair Guide
  • Samsung T959V JTAG Pinout
  • Samsung T959V Repair File
  • Samsung T959V FULL DUMP
  • Samsung T959V Repair Guide
  • Samsung SGH-I908 JTAG Pinout
  • Samsung SGH-I908 Repair Dump
  • Samsung SGH-I908 Repair Guide
  • Huawei E180 JTAG Pinout
  • Huawei E180 Repair File
  • Huawei E180 FULL DUMP
  • Huawei E180 Repair Guide
  • Huawei C31 JTAG Pinout
  • Huawei C31 Repair Dump
  • Huawei C31 Repair Guide
  • HTC Vogue / PPC 6900 JTAG Pinout
  • HTC Vogue / PPC 6900 Repair File
  • HTC Vogue / PPC 6900 FULL DUMP
  • HTC Vogue / PPC 6900 Repair Guide
  • ZTE R518 JTAG Pinout
  • ZTE R518 FULL DUMP
  • ZTE R518 Repair Guide
  • ZTE R518 Repair File
  • SKY-IM S550S JTAG Pinout
  • SKY-IM S550S Repair DUMP
  • SKY-IM S550S Repair Guide

Discussion:
Full Flashes Uploaded :
ORT Team News and Blog :

ORT is a Real JTAGger's choice

http://www.ORT-JTAG.com
http://www.GPGORT.com


 
Top
kerlin1708
view post Posted on 23/5/2012, 16:45     +1   -1




RIFF JTAG - HTC 7 Surround T8788 unbrick, Desbloquear SuperCID y reparación de IMEI apoyo

Por favor, haga clic en "Buscar actualizaciones" botón en el RIFF . JTAG Manager para descargar e instalar los nuevos archivos

05/23/2012 RIFF JTAG - HTC 7 Surround T8788 (HTC Mondrian) unbrick, Desbloquear SuperCID y reparación de IMEI apoyado

RIFF Box - JTAG Revolución
 
Top
12 replies since 5/4/2011, 16:00   1312 views
  Share