RIFF JTAG - CDMA Samsung SCH-S109 (MSM6000) Repair supported and more !
20.04.2011 CDMA Samsung SCH-S109 (MSM6000) Repair supported
Resurrecting Samsung S109 is simple. Phone is auto powered on with charger connected; battery presence is not required.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0x3FFFFF).
To resurrect Samsung S109:
Solder JTAG cable to Samsung S109 JTAG pads;
Connect ignition cable for auto power on or use battery;
Make sure Samsung S109 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;
20.04.2011 JTAG Manager v1.31, RIFF Box Firmware v1.23 released
Whats new :
JTAG Manager 1.31
“RUN/STOP” Loaders functionality is added (and alternative to the DCC Loaders)
This is required for some ARM7 cores when Debug Communication Channel (DCC) to/from core is not functional (like in MSM6000)
Firmware 1.23
Added 8/16/32-bit bus read/write access rotuines for ARM7 core
ARM7 debug is now available in ARM/Thumb modes (use the GDBServer for this);
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution
