GsM_SoLuCiOnEs_Creando una red de Soluciones

Solo Actualizaciones

« Older   Newer »
  Share  
roniscell
view post Posted on 4/4/2011, 17:35     +1   -1




Resurrection of HTC Athena is easy. Most convenient is to have USB cable connected and battery inserted.
If during connection progress bar in JTAG Manager keeps running from 0 to 100% press with stylus the reset button on the phone (reset button is near to the JTAG pads).
Resurrector will reflash IPL and SPL areas. You can select SPL version to be flashed in the settings window which popups before resurrection. IPL which is flashed: “ATHENA IPL DVT 2.02 H3” version.
Current resurrector works only with HTC Athena hardware revisions which have DiskOnChip H3 memory chip installed. If you have hardware revision with DiskOnChip G4 memory chip used then select different resurrector.
To resurrect HTC Athena with DiskOnChip H3:
Solder JTAG cable to HTC Athena JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure HTC Athena is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Camera’ key and press ‘Power ON’ key or use stylus to press ‘Reset’ button. In few seconds you should see TriColor picture.
Additional info:
DiskOnChip H3′s full NAND memory chip is divided into partitions by the internal memory controller. Thus DCC Loader creates virtual FLASH chip for each partition – you can read/write these partitions by selecting proper ROM index (“Access ROMi Address Space”) on the JTAG Manager’s DCC Read/Write page;
DiskOnChip H3 has no spare zones, thus only Main field must be used during write operations. ECC Enable checkbox has no meaning here.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

www.jtagbox.com/jtag-news/riff-jtag...pair-supported/
 
Top
view post Posted on 8/4/2011, 21:05     +1   -1
Avatar

Member

Group:
Member
Posts:
168
Reputation:
0
Location:
[email protected]

Status:


ORT-JTAG - HTC EVO 4G A9292 (HTC Supersonic) Repair Dead Boot [World FIRST]
ORT - JTAG UPDATE
[09 Apr 2011]

Description :
HTC EVO 4G A9292 (HTC Supersonic) Repair Dead Boot [World FIRST]
Special thx : [Arkadiy , Pulian]

Released Stuffs :

HTC EVO 4G A9292 Repair File
HTC EVO 4G A9292 JTAG Pinout
HTC EVO 4G A9292 Instructions


Full Flashes Uploaded :
Download i5700_0x00000000_512MB_RAW.rar

Previous Update : Samsung GT-S8530 Repair Dead Boot [World First]
ORT Team Blog : Videos and Manuals


Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
HTC 7

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 9/4/2011, 18:33     +1   -1




IFF JTAG - HTC 7 Mozart Unbrick, Unlock, IMEI Repair, CID Repair, ModelID Repair sup

09.04.2011 HTC 7 Mozart Unbrick, Unlock, IMEI Repair, CID Repair, ModelID Repair supported


Resurrecting HTC Mozart is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.60.1000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PD6710000′.


To resurrect HTC Mozart:
Solder JTAG cable to HTC Mozart JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Mozart is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.


RIFF Box – JTAG Revolution

www.jtagbox.com/
 
Top
roniscell
view post Posted on 12/4/2011, 15:40     +1   -1




RIFF JTAG - CDMA HTC Droid Eris, HTC Polaris and more

http://www.jtagbox.com/jtag-news/riff-jtag...pair-supported/

Resurrecting HTC Droid Eris is easy. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PB0010000′.
To resurrect HTC Droid Eris:
Solder JTAG cable to HTC Droid Eris JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Droid Eris is selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.


To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume down’ key and press ‘Power ON’ button to enter HBoot menu;
Hold ‘Volume up’ key and press ‘Power ON’ button to enter Recovery mode;
12.04.2011 HTC Polaris (HTC Cruise) Unbrick, Unlock, IMEI and CID Update, ModelID repair supported


Resurrecting HTC Polaris is easy.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 2.20.AxeBox. Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘POLA10000′.


To resurrect HTC Polaris:
Solder JTAG cable to HTC Polaris JTAG pads;
Insert USB Data cable into board and PC;
Make sure HTC Polaris selected in the list of models;
If you use battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

12.04.2011 QUALCOMM NOR Generic DLL-s update:

QSC1100_X14_NOR,
QSC60XX_L18_D08_NOR,
QSC60XX_L20_D08_NOR,
QSC60XX_L24_D08_NOR
Whats new:
Added support for NOR Chips which have Intel/Sharp Extended Command Set (according to the CFI specification)
This means any NOR flash chip which is manufactured by CFI standard (it means all NOR flash chips) will be supported with above listed DLL-s. There is no need to update DCC Loaders for single flash chip ID, since configuration data are obtained from CFI.

12.04.2011 RIFF JTAG Manager v1.30, RIFF Box Firmware v1.22 released

Firmware 1.22
---------------------------
Fixed bugs in ARM7 core handling routines


JTAG Manager 1.30
---------------------------
Added DISABLE_POLLING request processing from DCC Loader
(used by DCC Loaders which have small RAM size available and there is no DCC RX polling is implemented in RIFFBOX firmware for current core);

Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
 
Top
roniscell
view post Posted on 13/4/2011, 23:30     +1   -1




ORT-JTAG - MSM 6000 CDMA Support , Huawei U1310 Repair Dead Boot and MORE
ORT - JTAG UPDATE
[14 Apr 2011]

Description :
ORT Plus V1.38
Huawei U1310 Repair Dead Boot


What's new in ORT Plus V1.38 ?
MSM6000 Supported
ARM 7 Core Support Added


Released Stuffs :

ORT Plus V1.38
Huawei U1310 Full Dump
Huawei U1310 Repair File
Huawei U1310 JTAG Pinout
Huawei U1310 Instructions
HTC Dream DREA100 Repair File
HTC Folders RE-ORGANIZED


Full Flashes Uploaded :
Download I9000_FULL_RAW.rar

Previous Update : Samsung T959 Unbrick / Repair Dead Boot
Previous Update : HTC Droid Eris Repair Dead Boot
ORT Team Blog : Videos and Manuals


Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
HTC 7

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
http://forum.gsmhosting.com/vbb/f475/ort-j...t-more-1246825/
 
Top
roniscell
view post Posted on 16/4/2011, 13:34     +1   -1




ORT - JTAG UPDATE
[16 Apr 2011]

Description :
Motorola A3000 Repair Dead Boot
Motorola A3100 Repair Dead Boot


Released Stuffs :

Motorola A3000 Full Dump
Motorola A3000 Repair File
Motorola A3000 JTAG Pinout
Motorola A3000 Instructions
Motorola A3000 SM
Motorola A3000 Drivers
Motorola A3000 ROM
Motorola A3000 MB60 Download Tool
Motorola A3100 Full Dump
Motorola A3100 Repair File
Motorola A3100 JTAG Pinout
Motorola A3100 Instructions
Motorola A3100 SM
Motorola A3100 Drivers
Motorola A3100 ROM
Motorola A3100 MB60 Download Tool


Full Flashes Uploaded :
Share FULL Flashes

Previous Update : MSM6000 Supported
ORT Team Blog : Videos and Manuals


Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
HTC 7

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 19/4/2011, 04:58     +1   -1




ORT-JTAG - LG RD6300 Repair Boot [CDMA] ORT Plus V1.39 - MirrorBit Flash Support
ORT - JTAG UPDATE
[19 Apr 2011]

Description :
LG RD 6300 Repair Boot
ORT Plus V1.39


What's new in ORT Plus V1.39 ?
Spansion MirrorBit Flash Support


Released Stuffs :

LG RD6300 Full Dump
LG RD6300 Repair Dump
LG RD6300 JTAG Pinout
LG RD6300 Instructions
ORT Plus V1.39


Full Flashes Uploaded :
Share FULL Flashes

Previous Update : Motorola A3000 / A3100 Repair Boot
ORT Team Blog : Videos and Manuals


Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
HTC HD7

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 21/4/2011, 21:40     +1   -1




RIFF JTAG - CDMA Haier C300 Repair supported, JTAG Manager v1.32 released

21.04.2011 CDMA Haier C300 Repair supported


Resurrecting Haier C300 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.


To resurrect Haier C300:
Solder JTAG cable to Haier C300 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Haier C300 is selected in the list of models;
Click Resurrect button;
Choose which areas to flash;
Wait till software signals a successful operation completion;
De-solder JTAG wires;

21.04.2011 JTAG Manager 1.32 released
---------------------------
Resurrector DLLs can now request current Memory Chip IDs
This is most usefull for NOR-based devices since sometimes such devices require different firmware for different NOR memory chip IDs. Thus resurrector DLLs will be able to perform automatic selection of resurrection data.


Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution
 
Top
roniscell
view post Posted on 23/4/2011, 15:43     +1   -1




ORT-JTAG - HTC MAX 4 G T8290 [ HTC Quartz ] Repair Boot , Unlock

ORT - JTAG UPDATE
[23 Apr 2011]

Description :
HTC MAX 4G [ HTC Quartz ] Unbrick , Unlock , Repair Dead Boot
HTC Magic 32B Repair File

Released Stuffs :

HTC MAX 4G Repair File
HTC MAX 4G JTAG Pinout
HTC MAX 4G Instructions
HTC Magic 32B Repair File
HTC Magic JTAG Pinout [fixed]


Full Flashes Uploaded :
Share FULL Flashes

Previous Update : HOT CDMA Models Micromax C112 Repair
ORT Team Blog : Videos and Manuals


Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
ZTE F156

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 28/4/2011, 19:40     +1   -1




ORT - JTAG UPDATE
[28 Apr 2011]

Description :
HTC P6500 / HTC Sedna / O2 XDA Mantle Repair Dead Boot
HTC P6500 / HTC Sedna / O2 XDA Mantle Unlock
HTC P6500 / HTC Sedna / O2 XDA Mantle IMEI Repair / Change

Released Stuffs :

HTC SEDNA Repair File
HTC SEDNA JTAG Pinout
HTC SEDNA Instructions


About This Update :
See More Details

Previous Update :
HOT CDMA Models Added

ORT Team Blog :
Repair Videos and Manuals

Need a Hand ?
Contact me if you have ORT-JTAG and following dead phones in Hand
Samsung GT-i9003 Galaxy SL

ORT is a Real JTAGger's choice

www.ORT-JTAG.com
www.GPGORT.com
 
Top
roniscell
view post Posted on 29/4/2011, 15:22     +1   -1




ORT-JTAG - OMAP 3630 Support - Huawei C2828,EC121, ZTE S618 Repair Boot


ORT - JTAG UPDATE
[29 Apr 2011]

Description :
Huawei EC 121 Repair Boot
Huawei C2828 Repair Boot [thx to irfan]
ZTE S618 Repair Boot

Released Stuffs :

ORT Plus V1.42
Huawei EC121 Dump
Huawei EC121 JTAG Pinout
Huawei EC121 Instructions
Huawei C2828 Dump
Huawei C2828 JTAG Pinout
Huawei C2828 Instructions
ZTE S618 Dump
ZTE S618 JTAG Pinout
ZTE S618 Instructions


ORT Plus V1.42 Release Notes :
Dump Analyzer 256K Blocks Added
OMAP 3630 CPU Support initials Added [ Beta ]
MSM 7200 CPU ID [0x300E00E1] Integrated for recognization
Support NOR Flash ID [0x009E0098]
Support NOR Flash ID [0x882E0020]



Full Flashes Uploaded :
Share FULL Flashes

Previous Update :
HTC SEDNA / HTC P6500 Repair Boot

ORT Team Blog :
Repair Videos and Manuals


ORT is a Real JTAGger's choice

www.ORT-JTAG.com
 
Top
j3soft
view post Posted on 12/5/2011, 16:49     +1   -1




12.05.2011 Samsung Galaxy Ace S5830 Unbrick – Boot repair supported


Samsung S5830 resurrection is simple. Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.


To resurrect Samsung S5830 do this:
Solder JTAG cable to Samsung S5830 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure Samsung S5830 is selected in the list of models;
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.


To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On to enter Download Mode;
12.05.2011 Huawei E5830 Broadband modem Unbrick – Boot repair supported


Resurrecting Huawei E5830 is simple. Just make sure you solder all JTAG signals. Connection can be established with USB Cable connected, though in some rare cases battery presence may be required.
If modem is not detected by RIFFBOX JTAG, disconnect JTAG connector, re-insert modem into USB and then connect back the JTAG connector.
Please note, if only an USB cable is connected the device is detected by PC as unknown device. So, after resurrection in order to check if modem is alive make sure battery is connected.


To resurrect Huawei E5830:
Solder JTAG cable to Huawei E5830 JTAG pads;
Insert Huawei E5830 modem into any USB port for power;
Make sure Huawei E5830 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires;
12.05.2011 Samsung Eternity A867 Unbrick - Boot repair supported


The Samsung A867 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.


To resurrect Samsung A867:
Solder JTAG cable to Samsung A867 JTAG pads;
Connect USB cable;
Make sure Samsung A867 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.


To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Camera’ keys and press ‘Power ON’ button.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

RIFF Box – JTAG Revolution
 
Top
roniscell
view post Posted on 24/6/2011, 04:06     +1   -1




HTC Mozart [T8698] [HTC 7] Unbrick / Repair Boot / Unlock / IMEI Change Rel.


ORT - JTAG UPDATE
[24 JUNE 2011]

Description : 
  • HTC Mozart Unbrick / Repair Unlock / IMEI Repair and Change


Released Stuffs :

  • HTC Mozart JTAG Pinout
  • HTC Mozart Repair File
  • HTC Mozart FULL DUMP
  • HTC Mozart Repair Guide
  • HTC Mozart Unlocking Video



Full Flashes Uploaded :

Previous Update :

ORT Team News and Blog :


ORT is a Real JTAGger's choice

http://www.ORT-JTAG.com
http://www.GPGORT.com




 
Top
kerlin1708
view post Posted on 17/11/2011, 16:57     +1   -1




ORT JTAG - Samsung GT-S3850 Corby de inicio de reparación II muertos y más noticias en el interior [+]

ORT - JTAG ACTUALIZACIÓN
[16 NOV 2011]


Descripción:]
Samsung GT-S3850 de inicio de reparación [ thx a hamed_karamouz ]
Publicado para animales:
Samsung GT-S3850 JTAG Pinout
Samsung GT-S3850 de reparación de archivos
Samsung GT-i5510 reparación de archivos con EFS de reparación y manipulación de bloques defectuosos
Samsung GT-i5510 Patillas [ fijo ]
Samsung SHW-M130K reparación de archivos con EFS de reparación y manipulación de bloques defectuosos
GT-S3850 Instrucciones:
Haga las conexiones JTAG
Conexión de la batería y cable USB
Asegúrese de reparación de archivos está en el "teléfono" carpeta
Inicio ORT Además la versión más reciente
Haga clic en Escanear
Ir a la reparación de un solo botón
Seleccione Modelo - Samsung - GT-S3850
Haga clic en Reparar y esperar a que la operación hasta el final
Ponga el modo de descarga de teléfono y el flash
ORT Noticias del Equipo Blog:
Videos y Manuales de Reparación
comForo de Soporte en Español
Turkce Destek Forumu
ORT 中文 讨论 区
JTAG Buscador de empezar
TRO es una opción de JTAGger del Real Madrid
www.ORT-JTAG.com
 
Top
roniscell
view post Posted on 19/11/2011, 14:01     +1   -1




Whats new :

Added support for: 
LG P999 G2X (LG Star) Modem unbrick/repair supported


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution




19.11.2011 – QUALCOMM MDM6600 NAND Generic DLL released
Whats new:
QUALCOMM MDM6600 NAND DLL
Use this for phones which have MDM6600 in baseband – eg LG P999, iPhone 4s, and many other phones which use TEGRA2 AP CPU.

QUALCOMM MSM7227 OneNAND DLL (2kb page)
QUALCOMM MSM7227 OneNAND DLL (4kb page)
QUALCOMM QSC6xxx OneNAND DLL
All other QUALCOMM Generic DLL-s are now under same branch, so here is full revised list :

ESM7xxx L41 D04 NAND
MDM6600 NAND
MSM6xxx L06 D02 NAND
MSM7227 L41 D08 OneNAND
MSM7227 L41 D08 OneNAND 4k
MSM7xxx L41 D04 NAND
MSM7xxx L41 D08 NAND
QSC1100 x14 NOR
QSC60xx L18 D08 NOR
QSC6xx L20 D08 NOR
QSC60xx L24 D08 NOR
QSC6xxx L32 D08 NAND
QSC6xxx L36 D08 NAND
QSC6xxx L36 D08 OneNAND
QSD8xxx L41 D04 NAND
Press “Check for updates” button in order to download and install new files.


RIFF Box – JTAG Revolution
 
Top
20 replies since 4/4/2011, 17:35   129 views
  Share