roniscell |
|
| IFF JTAG - Samsung GT-i8700 Omnia 7 , Samsung W299 Duos Unbrick - Boot repair suppor
29.07.2011 Samsung GT-i8700 Omnia 7 , Samsung W299 Duos Unbrick – Boot repair supported
Resurrecting Samsung I8700 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung I8700:
- Solder JTAG cable to Samsung I8700 JTAG pads;
- Make sure Samsung I8700 is selected in the list of models;
- Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button. In few seconds phone enters download mode.
Resurrecting Samsung W299 is simple. Phone is auto powered on with USB Data Cable connected to the PC while battery is inside. In case you use the battery only please note you will have to press Power On key once.
To resurrect Samsung W299:
- Solder JTAG cable to Samsung W299 JTAG pads;
- Make sure Samsung W299 is selected in the list of models;
- Insert Battery into phone and connect USB cable (in case you not use USB cable, press once the Power ON key on the phone)
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution RIFF JTAG -Samsung Galaxy S II Unbrick Support and much more !
29.07.2011 New RIFF JTAG Updates :
- RIFF JTAG Manager v1.34
- RIFF Box firmware v1.26
- RIFF GDB Server v1.04
With new release we added support for new ARM core(s) - Cortex-A9 in single core and multicore configuration.
Project now supports Unicode, so there is Russian and Chinese language available !
JTAG Manager now supports 64bit addressing, thus allowing You to dump large memory chips (eMMC and iNAND) !
New resurrectors DLL-s
- Samsung Galaxy S II (Samsung i9100) Unbrick, Boot repair
- SonyEricsson x10 Unbrick, Boot repair
- Samsung CDMA B119
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.
RIFF Box – JTAG Revolution |
| | |
